JT Lite JT2 10' 6" JUMBOTRAC The patch assembly can be

The patch assembly can be glued with HH-66 cement or welded with either a RF bar welder or handheld hot air welder

It is used on both hip end and gable designs of the 50x Jumbotrac system

or lightweight décor

This eight arm fitting serves as the crown fitting for all square

JT Lite JT2 10' 6" JUMBOTRAC The patch assembly can beThis kedered aluminum tubing is used as a rafter in the Jumbotrac Lite 20' wide frame tent system. Each length of tubing is drilled with parallel 7 16" diameter through holes located 3" from each end of the extrusion for connection to a 3 8" Diam. push button and an additional hole in the center of the extrusion. Specifications: Base Material: 2. 72" x 2. 06" JT2 Extrusion 6061 T6 Structural Aluminum Tubing, ID 1. 750", OD 2. 06", and a 0. 125" wall