Truma Exhaust duct AE3 55mm diam (order in multiples of 20M) Bathroom Each bin requires 4 fixings

Each bin requires 4 fixings for correct installation

Is a floor grommet and insulation elbow all in one fitting Designed to allow you to run the 65mm heater or air con ducting under the vehicle safely Screw to the under side of your vehicle (no screws supplied) and the narrow end stands up through the floor to allow to connect the 65mm ducting internally On the underside you can connect your 65mm ducting centrally and it allows theTruma 80mm ducting to work as a protective sleeve and insulator Call Us Email Us

Special shaped glass dome is aerodynamic

Fitting onto the steering wheel

Truma Exhaust duct AE3 55mm diam (order in multiples of 20M) Bathroom Each bin requires 4 fixingsStainless flue pipe for truma fires. 55mm diameter. used on the truma s3002 models and normally installed with ducting 231699 which is fitted concentrically to provide a shield for the hot flue pipe. Please note that the ends of this duct are sharp, please be careful when removing the tape.