Method of measurement of centre beam intensity and beam angle(s) of reflector lamps included-in-kit

Method of measurement of centre beam intensity and beam angle(s) of reflector lamps included-in-kit1 Scope This Technical Report describes the method of measuring and specifying the centre beam intensity and the associated beam angle(s) of reflector lamps. It applies to incandescent, tungsten halogen and gas discharge and LED based reflector lamps for general lighting purposes. It does not apply to lamps for special purposes such as projection lamps. These recommendations relate to design testing of lamps only.

The range of valves covered by BS 5353 is given in Table 1

Part 1 of BS ISO 15489-1 provides guidance on managing records of originating organizations

and fitted with a “vehicle communication system”

Additional tests are undertaken which are agreed upon between customer and manufacturer to establish the compatibility between the cable sheath and the adhesive or the plaster or to establish the stapling ability

ships’ hoists

paint products

including Food

Markings on fuses

— microwave ovens that cannot accept a load having a diameter of ≥ 200 mm or a height of ≥ 120 mm

This Guide also relates key characteristics of various types of RMs to the different applications

12 assists you with test and operating conditions such as the accuracy of measurements

non-water soluble or emulsifiable