GoBoard FX Riser 36"

GoBoard FX Riser 36"The GoBoard FX Riser is a drain riser designed to connect GoBoard Universal Drain Body assemblies with GoBoard FX Designer Series drain grates. The component functions as the vertical adjustment point within the shower drain assembly, allowing installers to set the finished grate height relative to the tile surface. The drain riser features an adjustable height design that supports precise alignment of the drain grate with surrounding tile and grout

000 Dry 5/8"-11 DRB01000 1" 12

Specification Details Product Type De-waxed shellac sanding sealer Recommended Use Interior wood surfaces only Topcoat Compatibility All clear finishes

the wedges can be collected and reused for future installations

the spacers can be stacked to create larger spacing combinations and are suitable for wall and floor tile installations requiring accurate tile positioning

offering fast dry time

stable reference edge for guided cutting

Water Rings & Mild Acid Etch Marks Application Method Floor Machine

and Minimontolit Tile Cutters

Specification Details Operating Voltage 240V Power Output 12 W/ft² Mat Thickness 1/8" Maximum Temperature 194°F (90°C) Minimum Temperature 50°F (10°C) Heating Cable Single wire with ground braid outer layer Cold Lead 2-wire

The wave-shaped notch pattern helps mortar ridges collapse into the valleys with minimal side-to-side movement

Soft Cured Concrete

and concrete profiling